60ml Monoject syringe flange
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One of my bunnies is under the weather and feeding the thick Critical Care through the syringe was difficult because…
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 494
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
One of my bunnies is under the weather and feeding the thick Critical Care through the syringe was difficult because of the very small flange on the syringe. This gives a better grip so it's easier to generate the opposing force to the plunger. Ergonomics could use some work, included Fusion files if you'd like to tweak.
Designed for monoject 60ml syringe, but should work on any syringe with a 30mm OD body.
Printed in PETG, but PLA will probably work. Four perimeters, 20% infill, feels very sturdy.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Filament: Inland PETG
Category: Other