Eyedrop helper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This device help center the dropper over the eye
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 621
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My father needed assistance for using eyedrops, because it was difficult to center the dropper with the eye. So i designed a device that, once put over the eye, allow the dropper to be right over the center. The device can be easily cleaned with alcohol or any disinfectant. I printed this in PLA and ABS, at 0.2 layer height, 15% infill, no support/brim/raft. It took about 39 min to print and used only 1.28 meters of filament. I made another for one neighbor, with the same problem, and he was very happy using it. The one in the picture is printed in PLA, at 0.2mm layer height.