Eyedrop helper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This device help center the dropper over the eye
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 64
- Makes
- 0
- Views
- 621
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My father needed assistance for using eyedrops, because it was difficult to center the dropper with the eye. So i designed a device that, once put over the eye, allow the dropper to be right over the center. The device can be easily cleaned with alcohol or any disinfectant. I printed this in PLA and ABS, at 0.2 layer height, 15% infill, no support/brim/raft. It took about 39 min to print and used only 1.28 meters of filament. I made another for one neighbor, with the same problem, and he was very happy using it. The one in the picture is printed in PLA, at 0.2mm layer height.