Z axis rod/screw Mount #2 (modded) Max Micron and other Prusa i3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is just a slight mod to my original upper Z mounts.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
this is just a slight mod to my original upper Z mounts. the 1st ones I did the outer face hangs off the edge of the frame 2020 extrusion on top. Annoyed me so I moved the mounting screw in and jogged the face a tad so it stays inside the frame structure.
As before I have mounts for the nuts os no wrench is needed in a tight spot to tighten the rod caps(do not over tighten as that will bend the motor mount down and throw the whole printer out of square) extra screw mount in the back if desired(though not really needed) return down the back to keep the mount square to the frame easier.
For the offset style Prusa i3 clones.. not for "inline" where the rod is in plane with the screw.
Print instructions
Unassociated tags: Max Micron, Prusa i3, Z mount
Category: 3D Printer Parts