Y.A.S.H. (Yet Another Soap Holder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet Another Soap Holder. Self-draining design keeps your soap dry and does the hard work for you.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 290
- Wydruki
- 1
- Wyświetlenia
- 835
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my take on the classic soap holder. I wanted something that would securely hold my soap and prevent it from turning to goo in soaking water. I also wanted something that I would not have to remember to drain, and also wouldn't collect gooey soap water.
This soap holder should be placed near the edge of a sink or tub. It features rows of precisely designed supports which are sloped down towards the back wall to prevent your soap from sliding off the supports. It also features nubs on the ends of the supports to further prevent any slippery shenanigans.
It will easily hold a large bar of moisturizing soap from any bird-themed brand of soap.
Features suction-enabling bottom surface so that the holder will stay in place. Also features a PETG recycling symbol so that you can toss it in the recycling bin when it is no longer useful. Also included STL that has no recycling symbol
Recommend printing in PETG as it will resist water better than PLA. Printed at 0.2mm layer height, with variable layers enabled. The sloping surfaces will benefit from smaller layers. I used 10% infill.