1 / 2
Poignée pour plateau sans nom - (EX: ENDER 3, ENDER 3 V2...) / Handle for tray nameless - (EX: ENDER 3, ENDER 3 V2...)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
N'oubliez pas de commenter, aimer et mettre vos fabrications ! / Don't forget to comment, like and post your creations!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 820
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
FR:
- Possibilité de vous la customiser avec votre pseudo. Demandez par messages privés ici sur printables comme sur la photo en blanche
- Une poignée avec un entraxe de 170 mm ( Ender 3, wanhao D12, Ender 3 V2 et la plupart des imprimantes en 200 +)
- Plus longue et plus haute que la plupart des versions actuelles trouvable ailleurs dans un design original (voir photos)
- Mesurez l'axe des deux vis de votre plateau et ressort avant de procéder à l'impression de cette poignée ! Le milieu de l'axe dois faire 170 mm
- Besoin de support dans le dessous de la poignée (voir photos)
- Remplissage un minimum pour la résistance
- Possible en PLA mais... Utilisez plutôt un PETG ou autres vu que proche des résistances de chauffe du bed.
EN:
- Possibility to customize it with your nickname. Ask by private messages here on printables as on the picture in white
- A handle with a 170 mm center distance (Ender 3, wanhao D12, Ender 3 V2 and most 200+ printers)
- Longer and higher than most of the current versions found elsewhere in an original design (see pictures)
- Measure the axis of the two screws of your tray and spring before printing this handle! The middle of the axis must be 170 mm
- Need support in the underside of the handle (see pictures)
- Filling a minimum for the resistance
- Possible in PLA but... Use PETG or other materials as they are close to the heating elements of the bed.