1 / 7
TIROIRS DESSOUS MEUBLES TABLES / DRAWERS UNDER FURNITURE TABLES
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
N'oubliez pas de commenter, aimer et mettre vos fabrications ! / Don't forget to comment, like and post your creations!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
FR:
Un tiroir pour mettre sous une table de bois ou un bureau. (voir photos)
ATTENTION le tiroir n'est pas profond MAIS vous pouvez agrandir les axes Y sur une face pour l'agrandir (voir photos)
- Montage de la face avant avec deux vis M3 (Vous pouvez aussi le coller avec une chevilles ou directement la phase avant)
- Remplissage des inserts à 100%
- Imprimez comme sur les photos SVP. Aucun support nécessaire. Remplissage comme vous le désirez
- Vous pouvez agrandir le tiroir sur l'axe Z EN DESACTIVANT l'échelle uniforme en modifiant "Dessus de rail, Fond tiroirs et inserts".
- Aucune autres pièces n'a besoin d'être modifié pour l'agrandir
- Imprimer les inserts 4X pour mettre dans chaque trou afin de renforcer la zone de serrage
EN:
A drawer to put under a wooden table or a desk (see pictures)
ATTENTION the drawer is not deep BUT you can enlarge the Y-axis on one side to enlarge it (see pictures)
- Assembly of the front panel with two M3 screws (You can also glue it with a dowel or directly the front panel)
- Filling the inserts to 100%.
- Please print as shown on the pictures. No support needed. Filling as you wish
- You can enlarge the drawer on the Z-axis by turning off the uniform scale by modifying "Top of rail, Bottom of drawers and inserts".
- No other parts need to be modified to enlarge it
- Print 4X inserts to put in each hole to reinforce the clamping area