1 / 7
TIROIRS DESSOUS MEUBLES TABLES / DRAWERS UNDER FURNITURE TABLES
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
N'oubliez pas de commenter, aimer et mettre vos fabrications ! / Don't forget to comment, like and post your creations!
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 54
- Makes
- 0
- Views
- 368
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
FR:
Un tiroir pour mettre sous une table de bois ou un bureau. (voir photos)
ATTENTION le tiroir n'est pas profond MAIS vous pouvez agrandir les axes Y sur une face pour l'agrandir (voir photos)
- Montage de la face avant avec deux vis M3 (Vous pouvez aussi le coller avec une chevilles ou directement la phase avant)
- Remplissage des inserts à 100%
- Imprimez comme sur les photos SVP. Aucun support nécessaire. Remplissage comme vous le désirez
- Vous pouvez agrandir le tiroir sur l'axe Z EN DESACTIVANT l'échelle uniforme en modifiant "Dessus de rail, Fond tiroirs et inserts".
- Aucune autres pièces n'a besoin d'être modifié pour l'agrandir
- Imprimer les inserts 4X pour mettre dans chaque trou afin de renforcer la zone de serrage
EN:
A drawer to put under a wooden table or a desk (see pictures)
ATTENTION the drawer is not deep BUT you can enlarge the Y-axis on one side to enlarge it (see pictures)
- Assembly of the front panel with two M3 screws (You can also glue it with a dowel or directly the front panel)
- Filling the inserts to 100%.
- Please print as shown on the pictures. No support needed. Filling as you wish
- You can enlarge the drawer on the Z-axis by turning off the uniform scale by modifying "Top of rail, Bottom of drawers and inserts".
- No other parts need to be modified to enlarge it
- Print 4X inserts to put in each hole to reinforce the clamping area