The Stir Stick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple tool I created for my own use.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 262
- Wydruki
- 4
- Wyświetlenia
- 867
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Some time in 2020, I was not able to get any wood craft sticks. Or as I describe them, Popsicle sticks.
It was the most bizarre thing I have ever encountered. There are sticks outside on the ground I thought, maybe I can make them…
At the time, I was doing a lot of epoxy resin projects and acrylic paint projects. So having a disposable stirring tool was important. Out of necessity, I decided to print some of my own Popsicle sticks.
But of course, I hate myself. So why stop there?
After some tinkering, this is what I came up with.
To this day I use them, it is very effective at mixing! The PLA is also relatively immune to acetone when compared to epoxy, so I could actually wash these off and re-use them! You can also wash with water if you are using this with paint.
*** Considerations
- You want to print this 3 perimeters and 100% solid infill. It should be solid plastic, otherwise you may lose strength.
- Use any material your heart desires, just remember to factor chemical resistance to whatever solvent you'll use to clean the tool. :-)
I have been selfishly using these, with little regard for helping the art community. My apologies. I am releasing it public domain, I hope you find it useful!