1 / 1
The Stir Stick — image 1

The Stir Stick

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple tool I created for my own use.

Rating
5 / 5
Likes
46
Downloads
262
Makes
4
Views
867
Reviews
4

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

Some time in 2020, I was not able to get any wood craft sticks. Or as I describe them, Popsicle sticks. 

It was the most bizarre thing I have ever encountered. There are sticks outside on the ground I thought, maybe I can make them… 

 

    At the time, I was doing a lot of epoxy resin projects and acrylic paint projects. So having a disposable stirring tool was important. Out of necessity, I decided to print some of my own Popsicle sticks. 

But of course, I hate myself. So why stop there? 

After some tinkering, this is what I came up with. 

    To this day I use them, it is very effective at mixing! The PLA is also relatively immune to acetone when compared to epoxy, so I could actually wash these off and re-use them! You can also wash with water if you are using this with paint. 

*** Considerations

  • You want to print this 3 perimeters and 100% solid infill. It should be solid plastic, otherwise you may lose strength. 
  • Use any material your heart desires, just remember to factor chemical resistance to whatever solvent you'll use to clean the tool. :-) 

    I have been selfishly using these, with little regard for helping the art community. My apologies. I am releasing it public domain, I hope you find it useful! 

Tags