Counting matching models…
This is a simple compact magnetic stirrer made to help mixing up photographic chemistry, though it could be used for other chemical mixing purposes. The idea is based on a number of DIY projects seen on YouTube that use an old computer…
Coffee Organizer for Coffee Corner Enhance your coffee station with this stylish and functional Coffee Cup & Stirrer Organizer . Designed to hold different cup sizes and neatly store stirrers, this model is perfect for home, office, or…
I needed a small plastic stirrer for mixing polyurethane resin for casting. Doing it manually seemed OK, but the distribution of dye left something to be desired - so I made a stirrer :-) Works perfectly! Doesn't mix very aggresively -…
Print at any settings, I just used my default 0.2 Layer Height setting and they come out fine. I'd recommend using a brim or raft just to help it to not peel up.
No support. Final project is 90mm(height)by 27mm(diameter). Needles are purchased from amazon. 1 package with 10 pieces. The needle total length is 80mm, tip is 50mm and end is 30mm. The the needle will drop fit into the base holes. I…
This is a very versatile OpenSCAD app that will let you create a wide variety of tools with different profiles and uses: spatulas, moulding tools, sanding blocks and paint stirrers (and what you can imagine). Some STLs are included as…
This is a simple but stylish holder for sugar and stir sticks, suitable for home use, as a piece of your work kitchen or even a snack corner in a conference room. Types double - the standard model and how it was designed - to accommodate…
Cover for Metrohm 801 stirrer to protect the stirrer from liquids. There are two types of covers, with or without a rim. The cover without a rim can be printed without additional supports. I would recommend printing it in polypropylene,…
Wax Spatula Set – 100mm & 150mm (3D Printable) This printable wax spatula set includes two sizes (100mm and 150mm) inspired by the humble wooden waxing stick, the unsung hero of hair removal, now promoted to reusable, 3D-printed status.…
A Stirling engine is a closed-cycle heat engine that converts thermal energy into mechanical work by cyclically heating and cooling a sealed, permanent gas (like air or helium) to make it expand and contract, driving pistons for power,…
I created those little helper set for small parts when I cleaned small parts I printed on my first SLA printer. Probably obsolete nowadays that I have a Photon M7 Pro instead of a Elegoo Mars Pro. I used a basic beaker back then. That…
A Stirling engine is a high-efficiency external-combustion heat engine that converts thermal energy into mechanical work. It operates by cyclically compressing and expanding a permanently contained working fluid—such as air or gas—between…
A simple 3-bladed paint stirrer which uses common/cheap dowel rod for a shaft (friction fit). Perfect for using up the last few meters on a spool of filament. Fully reusable, but cheap enough to throw away [almost] guilt-free. Just drive…
I used 3dprinre nedels and printed with pla. use som heat to get the nedels in plase.
Continuously Stirred Tank Reactor (CSTR), assembled with 5 bodies, important to print the "Bar" part 3 times. for the stirrer I would recomend printing with some rafts
this is a stirrup for horse riding. Due to my big feet i usualycaughht stuck in normal stirrups. I dsigned it in Tinkercad. I used a generator; tube. I chose 8 sides for the outer wall and a circular inner wall. i designed 1/3 of the…
progetto di un supporto per porta sostitutiva per nuclei in polistirolo per api
This is an original design for a 2 color presence token for the Spirit Island spirit Grinning Trickster Stirs Up Trouble . Together with the reminder tokens , you can print a set of 13 presence token, 3 defend tokens, and 3 isolate tokens…
Mezclador para taladro diseñado para impresion 3D Utiliza una tuerca de 3/8" y una varilla roscada o tornillo de 3/8". puedes usar el largo de la varilla de acuerdo al uso que le des. Puedes limpiarlo despues de cada uso para seguir…
After mixing small batches of acrylic paint with nothing but the end of the paintbrush to do the actual mixing, I got fed up. I'm not an artist and don't have a palette knife, so I improvised! It's itty bitty (the jar in the first picture…
This is a DIY magnetic stirrer I designed to upgrade my old "pc-fan-approach" Things needed: 1x 300mm GT2-belt 2x 608zz or 608rs bearings 1x M8x40mm or M8x50mm bolt 1x M8 Locknut 1x 2212 Brushless motor (I used an A2212/13T with 1000KV)…
3D gedruckter Magnetrührer für das Hobbylabor oder die Küche aus PLA [Bauteil Auflistung] PC Fan Step Down Modul Poti Kippschalter Ladebuchse Kabel //english: 3D printed magnetic stirrer for the hobby lab or kitchen. [component listing]…
This adaptor fits onto a pretty standard personal massage device that you just may have laying around. This particular adaptor is fit for an arboleaf massager but I've attached the fusion file so that you can edit the adaptor to fit any…
Turret caps for a Nikko Stirling Mount Master 25.4mm x 10mm unthreaded
2 different height rods (70 mm & 100 mm) for retrieving stir bars from a beaker. Pause print just after the hole for the magnet is starting to close over, insert magnet & resume print. Magnets are 3 mm height so pausing just above this…
Hello readers this is a small project I had done over the weekend. I needed a magnaeic stirrer at work, but because of some circumstances we couldn't order one. So I thought why shouldn't I build one by myself. I designed this thing with…
This magnetic stirrer uses a PC fan, a Mosfet, Potentiometer a few magnets and some wires. The purpose of this device is to stir with a rotating magnet without having contact inside the bottle/erleymeyer except for the single magnet. I…
Customized version of http://www.thingiverse.com/thing:1587846 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1587846 Instructions Using the following options: bohrung = 0.5 spiel = 0.5 breite = 10 modul…
It's a beautiful day, I think I'll skip my meds and stir things up a bit, sign Category: Signs & Logos
It's a beautiful day, I think I'll skip my meds and stir things up a bit, sign Category: Signs & Logos
Hey everyone! Another day, another Halloween decoration! This time, I decided to create a cute set of cocktail stirrers featuring cats, pumpkins, bats, and spiders. Each piece has its own child-friendly charm and fits perfectly into your…
The stirrer of my baking mashine has been broken. So I made this part is a replacement. Should be useable for most machines. Just use the SCAD file to make your own part. The example is printed with Verbatim PET because of food safety.…
2 different types available Precise 110mm and 50mm Standard ( with thumb extension ) 4 mm 6 mm 8 mm 10 mm 12 mm Download and apply !
I needed a stirring stick but didn’t have anything suitable, so I designed one that’s the perfect size and thickness to handle viscous silicone without breaking. It printed perfectly in PETG and worked great. The design is simple and…
A lot of nice stirrers out there already, but I needed one that was about 6 in long and able to be put in a hand drill for stirring 2-part epoxy.
20mm tall platform to elevate parts above a magnetic stir bar. 68mm wide. Can be used to clean parts. Printed in PETG it is fairly sturdy. The legs are shaped for a clockwise stirrer; you'll want to mirror it if yours is counterclockwise.
Remix von https://www.printables.com/model/935584-unbefugte-sind-nicht-befugt-unfug-zubetreiben
This is for 20x6x1,5mm neodym magnets, but you can take the FreeCAD file and modify it for your needs (MagnetsSketch)
Quick and easy paint stirrer, designed to print in 20 minutes using only 10g of filament! Length of the stick is 230mm so it should print on most 3D printers! ✨If you like what I make ✨ Like, follow, comment, share, review, and post your…
I needed it for storage, but maybe it would also be helpful for traveling
If you want a really good looking stick, you can use a prusa slicer to add a name. Be careful to choose a character set that is easy to print. I used 0.6 mm text. I have attached the project file that contains the added text, you can…
25cm long stick for mixing chemicals. Printing tips Material: PETG; Layer: 0.2mm; Infill: 42%.
Míchací vrtule k uchycení na závítovou tyč s lůžkem pro matici M6. Stirring propeller to be attached to a threaded rod with a seat for an M6 nut.
If you don't have access to a 3D printer, or would like to support my hobby, I have a shop where you can purchase this set. Visit StoreAllTheBits Online Store If you do your own 3D printing, but would still like to support my hobby, feel…
A replacement back cover for a Crane headlamp, sold by Hofer / Aldi. This is for the small red back-facing light. Print slowly and precisely in transparent filament. Support only needed for the bottom ring overhang, should NOT be needed…
A replacement knob for the rotary encoder of the IKA RTC Basic magnetic stirrer, featuring a position marking printed in a second color.
This is a replacement adapter for the 5 gallon pot attachment for the StirMate. The original one became warped over time and no longer worked. I printed this in PETG due to its heat resistance and safety with food.
Description This is a simple model, there are other WDT tools out there, but I like to share it because I found something interesting which make my design unique: The 3D printer nozzle cleaning needle, that you probably already have a…
Espresso Tamper and Stirrer Tray - 58mm Tamper Holder Keep your espresso setup tidy with this handy tray designed specifically for lever espresso machine accessories! This tray provides dedicated spots for your 58mm tamper and a…
Let your stir-stick air-dry by hanging it out of the way. Attaches to your baker's rack rail. The opening is only slightly smaller than the width of the stick, which allows you to easily pull it out at a slight angle without needing to…
This 3D-printed self-stirring coffee mug uses a gear-driven mechanism powered by a hand crank — no batteries required! Simply turn the side-mounted handle and the internal paddle mixes your drink evenly. The airtight lid features a TPU…
Magnetic Stirrer Adapter for Anycubic Wash & Cure 3 Plus This project is a fun and useful mod for the Wash & Cure 3 Plus, adding extra functionality beyond just cleaning prints. I designed a special adapter for the Anycubic Wash & Cure 3…
O si butta il ferro da stiro o si prova a sostituire qualche pezzo.
A stir stick remix with a finger keyhole for a more ergonomic and satisfying stirring experience.
I had been wanting to make an over powered custom stirplate for some time. I had all the parts on hand so I made this. - 200mmx150mm Project box - Arduino to send the PWM signal - 12v 3a powersupply - Potentiometer to control speed -…
Do you only need 3x neodimium magnets 9x3, 8x m5 nuts, fan diameter 80, 30 ohm rezistor, old damaged usb cable, superglue. You canadjust the rezistor size according to the speed. layer height 0,2 nozzle 0,4
ganci per appendere asse da stiro Polti Vaporella Essential Hooks for hanging ironing board
I affectionately call this the bean protector. It was designed to fit a 150mm crystalizing dish to cover the magnetic stirrer. There are two versions, The second version with extra protection did not print well (the cage was too small and…
Stirrer for a 6mm Shaft, 45mm Outside Diameter, 45° Blade Angle, most suitable for viscous Fluids I use it to mix polyethylene glycol granules into water
Tired of mixing paint or epoxy by hand, use this tool. Designed to be used with a 6mm threaded rod
Handle for Emulstir Emulsion Sauce Chef'N Moignée pour moulin à vinaigrette Emulstir de la marque Chef'N Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: Yes **Filament:** prusa filament ABS orange Category: 3D…
stirring rod holder made for Krups hand mixer, but probably also fits other brands
This is a simple but stylish holder for sugar and stir sticks, suitable for home use, as a piece of your work kitchen or even a snack corner in a conference room. Types double - the standard model and how it was designed - to accommodate…
Just another filament spool holder. I made this with the intention of storing vacuum sealed filament in a space saving manner. I found this model prints well and looks good in Sunlu Carbon Fiber PLA at temperature: Nozzle: 205C Bed : 60C…
Remix of the original model with a recess added to the base of the stirge so that it fits into the flying stick, also I increased the size of the recess on the base as when I printed the original, the base of the flying stick wouldn't fit…
My Bosch OptiMUM Series 9 food processor came without any stand or holder for its tools whasoever. So I designed this fairly simple stand for the interchangeable stirring tools. The design is based on those for the current 2025 Series 9…
Not Looking for Perfectly Mixed Paints? This 3D Print Isn't For You! If you prefer your paints unstirred and unshaken, then you can stop reading now! But for those who crave a smooth, consistent mix, simply drop your paint bottles in and…
I was tired of fumbling around to grab my coffee stir sticks so I made this container. Glue the Cap Alignment Ring to the cap before gluing the elevator to the cap (Otherwise you can't get it in). No supports needed. The coffee stir…
I needed to mix small batches of epoxy glue so I drew up a little cup and stir stick. The walls on the cup .stl are thin .02" but I print this using the vase or spiralize mode to save plastic and speed the printing. The cups in the photo…
Non-printed tools I used: https://www.amazon.com/gp/product/B07HJ33DYK/ https://www.amazon.com/gp/product/B00HP8SUUM/ Some screws I picked up from wal-mart. 4 x 1/2". 2oz "Bank sinkers" to do the actual stiring Make sure to use a…
The feet on some Thermo Fisher magnetic stirrer models are very short. As a result, liquids (especially salt-rich water) can cause corrosion and electrical safety issues when there are inevitable spills. This object is a stand for the…
Remixed it as it needed a further offset or the keyhole did not go all the way through the outer with a smaller diameter. Not built one as I ended up turning one up on the wood lathe in 10 minutes when I saw it was an 8 hour print :)…
This Model is a Stirring stick‘s dispenser. Let's print, best regards, Ray
Cover for Metrohm 801 stirrer to protect the stirrer from liquids. There are two types of covers, with or without a rim. The cover without a rim can be printed without additional supports. I would recommend printing it in polypropylene,…
Paint Can Opener: Provides better angled lift than a screwdriver. Use two for stubborn can. Places on the back side for magnets. Choice of two each 4mm and 6mm, and one 8mm, all 2mm thick. Hangup hole for 6mm. I used PLA at 0.20 layer, 4…
A resin stirrer is used to mix resin in the resin tank prior to printing. Ive printed this with TPU so it won't damage the film.
Originally the non-hole part of the drawing was higher but I stopped the current print when I realized that they were going to be too high so I lowered them in my .stl but I haven't reprinted it since, and it was one of my first 3d models…
Pour spare silicone at the end of a project into these to make dump molds, that you can chuck spare resin into at the end of a pour, to make stir sticks, to make more silicone and resin. Infinite glitch that helps stop overflow from going…
A Stirge. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toy & Game Accessories
3D printable topographic miniature of Stirling - 🇬🇧 United Kingdom Capture the beauty of Stirling 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 56.123, -3.936…
This cooling bowl stirrer is an open-hardware accessory designed to be compatible with the Aillio R1 and R2 coffee roaster cooling bowls. By actively agitating the beans during cooling, it: Speeds up heat dissipation Improves airflow…
Eccentric hole makes paint go brr when put in a electric drill, preferably a really fast one with a wall plug Put a ball bearing in your paint bottle This thing is all walls, print upright Requires: 1 M4x40mm flat top bolt 2 M4 washers 2…
These Coffee Sweetener & Stirrer Stations are compact, countertop-friendly organizers designed for everyday coffee and tea drinkers who value both order and practicality. The main compartments neatly store approximately 50 standard…
Part for a magnetic stirrer with hot plate, use PLA, PETG, or ABS. Designed to work with standard optical interrupter sensors. Use black or opaque filament.
Wax Spatula Set – 100mm & 150mm (3D Printable) This printable wax spatula set includes two sizes (100mm and 150mm) inspired by the humble wooden waxing stick, the unsung hero of hair removal, now promoted to reusable, 3D-printed status.…
case study model i made as an architecture student
I've been trying silicone and polyurethane casting and needed something strong enough to stir the brew. The stuff is hard to remove from tools and vessels so it needs to be something that can be used once. Very simple and fast print,…
antenna mount can be glues, double sided tap, or screwed in place and uses a zip tie to cinch the coffee stirrer in place.
这是一个极简的磁力搅拌台，可调速可充电，您可以使用它来搅拌各种液体。 设计原则是以最低成本来实现这个展示台，你需要这些东西： 硬件部分： 1-所有需要打印的.STL文件 2-从CDROM拆下来的小电机一个 3-带micro usb充电头的2000mah 7.4V锂电池（可替换成其他3-12v以内的锂电池） 4-PWM直流电机调速器1803BK 一个 ( https://m.tb.cn/h.fO5H4wx?tk=Mk1m2WgwUjy )…
This is a replacement exhaust grill for a Stirling Clothes Dryer after the original wouldn't stay in after deteriorating from use (heat, abuse etc). Suggest you need to use ASA, ABS or other high temp plastic when you print. you may need…
