1 / 4
Locomotive "Stirling One No1 (Eight Footer) — image 1
1 / 4

Locomotive "Stirling One No1 (Eight Footer)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Loved this when i saw the picture.

Rating
0 / 5
Likes
21
Downloads
479
Makes
0
Views
2,338
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

Loved this when i saw the picture. It lives in the Railway Museum in York, but 5" scale models are to be found in Brighton, Exmouth and Worthing according to Wikipedia.

A tender will follow as and when. Tender now included. The mid sized wheels fit this. (The loco's rear wheels.)

I have used the same device as I did with the S160 so that the wheels will spin freely and adjust to corners. This involves a bushing made from 4mm plastic tubing, usually meant for drain pipes and the like, cut into 4mm lengths and split with a removal of a 0.5mm slice. I have included a screen shot showing the wheel/axle assembly using this solution. The reasons being, the resin does not freely glide against itself or the Peco wheels, a means of holding the axles in place was needed, and this system allows the wheels to drift a little in their housings which is necessary when a long line of wheels go round corners if they are not on bogies.

Print instructions

Designed to print with Elegoo mars SLA 3D printer.