1 / 4
Stirling One No. 1 Tender for locomotive — image 1
1 / 4

Stirling One No. 1 Tender for locomotive

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Goes with the already posted Locomotive of the same name. The back wheels of which go with this tender.

Rating
0 / 5
Likes
14
Downloads
210
Makes
0
Views
891
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

Goes with the already posted Locomotive of the same name. The back wheels of which go with this tender.
I have used the same device as I did with the S160 so that the wheels will spin freely and adjust to corners. This involves a bushing made from 4mm plastic tubing, usually meant for drain pipes and the like, cut into 4mm lengths and split with a removal of a 0.5mm slice. I have included a screen shot showing the wheel/axle assembly using this solution. The reasons being, the resin does not freely glide against itself or the Peco wheels, a means of holding the axles in place was needed, and this system allows the wheels to drift a little in their housings which is necessary when a long line of wheels go round corners if they are not on bogies.

Print instructions

Designed to print with elegoo Mars SLA printer.