1 / 4
Stirling One No. 1 Tender for locomotive — zdjęcie 1
1 / 4

Stirling One No. 1 Tender for locomotive

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Goes with the already posted Locomotive of the same name. The back wheels of which go with this tender.

Ocena
0 / 5
Polubienia
14
Pobrania
212
Wydruki
0
Wyświetlenia
899
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Goes with the already posted Locomotive of the same name. The back wheels of which go with this tender.
I have used the same device as I did with the S160 so that the wheels will spin freely and adjust to corners. This involves a bushing made from 4mm plastic tubing, usually meant for drain pipes and the like, cut into 4mm lengths and split with a removal of a 0.5mm slice. I have included a screen shot showing the wheel/axle assembly using this solution. The reasons being, the resin does not freely glide against itself or the Peco wheels, a means of holding the axles in place was needed, and this system allows the wheels to drift a little in their housings which is necessary when a long line of wheels go round corners if they are not on bogies.

Print instructions

Designed to print with elegoo Mars SLA printer.