1 / 1
Ikea Lack enclosure five drybox in row no fillament buffer needed — zdjęcie 1

Ikea Lack enclosure five drybox in row no fillament buffer needed

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Five removable (sliding) dryboxes in a row on Ikea Lack Enclosure. Use only .3mf files - no .stl needed 15.11.2019…

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
1
Wyświetlenia
510
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Five removable (sliding) dryboxes in a row on Ikea Lack Enclosure.

Use only .3mf files - no .stl needed

15.11.2019 added clip

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Filament: doesn't matter PLA

Notes:

Cap for silica gel chamber maybe better made from some rubber fillament.

Use only .3mf files - no .stl needed

rewinder mechanism: https://www.thingiverse.com/thing:3962305

Post-Printing

For full set need

2x double rail

1x rail

5x bottom

5x top

5x rod

5x integrated autorewind spool holder - parametrized - https://www.thingiverse.com/thing:3962305

ca 250 g of silica gel for each box - https://www.traiva-shop.cz/bezpecnostni/pri-praci/4835-silikagel#14845

All other is optional:

Pc4-M10 Male Straight Pneumatic Connector - http://s.click.aliexpress.com/e/evkNbGcC

Mini LCD Humidity Meter - https://www.aliexpress.com/item/32991139200.html?spm=a2g0s.9042311.0.0.27424c4dtZNUAU

Acryl Lack spray - spray inner walls of box for airtigth sealing micropores

Silicon in tube for gasket - https://www.hornbach.cz/shop/Silikon-univerzalni-DEN-BRAVEN-310-ml-transparentni/4213983/artikl.html - Creating gasket is easy - mask bottom part with some hdpe (mikroten) foil or thin tape, extrude silicone into groove in top part, close together with bottom, wait until silicone cure, open, remove foil.

reusable zip tie for top/bottom fixing - https://www.gme.cz/stahovaci-pasek-rozpojitelny-kss-hvc-300-x-7-6mm-rozpojitelny-cerny

ca 5m ptfe 1,8-2mm id/ 4 mm od tube if holders mounted on front edge of ikea table desk (if mounted on back edge then lenght of original mmu2 tubes is sufficient)

Category: 3D Printer Accessories

Tagi