Ikea Lack enclosure five drybox in row no fillament buffer needed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Five removable (sliding) dryboxes in a row on Ikea Lack Enclosure. Use only .3mf files - no .stl needed 15.11.2019…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 1
- Views
- 510
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Five removable (sliding) dryboxes in a row on Ikea Lack Enclosure.
Use only .3mf files - no .stl needed
15.11.2019 added clip
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Filament:
doesn't matter PLA
Notes:
Cap for silica gel chamber maybe better made from some rubber fillament.
Use only .3mf files - no .stl neededrewinder mechanism: https://www.thingiverse.com/thing:3962305
Post-Printing
For full set need
2x double rail
1x rail
5x bottom
5x top
5x rod
5x integrated autorewind spool holder - parametrized - https://www.thingiverse.com/thing:3962305
ca 250 g of silica gel for each box - https://www.traiva-shop.cz/bezpecnostni/pri-praci/4835-silikagel#14845
All other is optional:
Pc4-M10 Male Straight Pneumatic Connector - http://s.click.aliexpress.com/e/evkNbGcC
Mini LCD Humidity Meter - https://www.aliexpress.com/item/32991139200.html?spm=a2g0s.9042311.0.0.27424c4dtZNUAU
Acryl Lack spray - spray inner walls of box for airtigth sealing micropores
Silicon in tube for gasket - https://www.hornbach.cz/shop/Silikon-univerzalni-DEN-BRAVEN-310-ml-transparentni/4213983/artikl.html - Creating gasket is easy - mask bottom part with some hdpe (mikroten) foil or thin tape, extrude silicone into groove in top part, close together with bottom, wait until silicone cure, open, remove foil.
reusable zip tie for top/bottom fixing - https://www.gme.cz/stahovaci-pasek-rozpojitelny-kss-hvc-300-x-7-6mm-rozpojitelny-cerny
ca 5m ptfe 1,8-2mm id/ 4 mm od tube if holders mounted on front edge of ikea table desk (if mounted on back edge then lenght of original mmu2 tubes is sufficient)
Category: 3D Printer Accessories
