Snap-On Sage/breville Barista Pro Espresso Steam Lever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Get inspired by Crema Coffee Steam Lever but don't want to spend $40 and take apart my new Breville Barista Pro…
- Ocena
- 5 / 5
- Polubienia
- 89
- Pobrania
- 752
- Wydruki
- 9
- Wyświetlenia
- 3983
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Get inspired by Crema Coffee Steam Lever but don't want to spend $40 and take apart my new Breville Barista Pro espresso machine. I designed the snap on the lever which no tool is required for installation. Due to its snap-on design, I need to rotate the lever position to horizontal in order to have the space to screw the handle. The classical design requires an M6 or 1/4" long setscrew(25mm or 1" length) to connect two pieces. You might also need to tap the handle hole before putting the screw. I also made another unibody design which no tool was required. All print does not require support, I will suggest turning on the brim for the thin handle.
All CAD design is done on OnShape. Feel free to modify it.
Note: It will only work for Breville Pro because the knob is thicker than Breville Express.
Category: Kitchen & Dining