1 / 8
Snap-On Sage/breville Barista Pro Espresso Steam Lever — image 1
1 / 8

Snap-On Sage/breville Barista Pro Espresso Steam Lever

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Get inspired by Crema Coffee Steam Lever but don't want to spend $40 and take apart my new Breville Barista Pro…

Rating
5 / 5
Likes
89
Downloads
752
Makes
9
Views
3,985
Reviews
9

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

Get inspired by Crema Coffee Steam Lever but don't want to spend $40 and take apart my new Breville Barista Pro espresso machine. I designed the snap on the lever which no tool is required for installation. Due to its snap-on design, I need to rotate the lever position to horizontal in order to have the space to screw the handle. The classical design requires an M6 or 1/4" long setscrew(25mm or 1" length) to connect two pieces. You might also need to tap the handle hole before putting the screw. I also made another unibody design which no tool was required. All print does not require support, I will suggest turning on the brim for the thin handle.

All CAD design is done on OnShape. Feel free to modify it.

https://cad.onshape.com/documents/76baac600edc5452bee2c465/w/5d91fda82b1dbb227254d923/e/f867d355deb53754853e4d77?renderMode=0&uiState=6289ff024db5323feeffc358

 

Note: It will only work for Breville Pro because the knob is thicker than Breville Express.

Category: Kitchen & Dining

Tags