Ender 3. Bed Leveling Wheel Clips and Wheel Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The bed height adjustment knob in the ENDER 3 printer enables precise adjustment of the bed height - 0.01 mm
- Ocena
- 4,625 / 5
- Polubienia
- 88
- Pobrania
- 583
- Wydruki
- 7
- Wyświetlenia
- 4422
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The bed height adjustment knob in the ENDER 3 printer enables precise adjustment of the bed height - 0.01 mm.
The handwheel is designed to work with a simple bed leveling device. This device can be found in other projects posted on the website.
You can use the knob independently of the aforementioned device.
The printout should have 90% infill. Print the two clips as a mirror image.
Installing the clip on the printer requires unscrewing the bed and using the washers.
The knob and clip were tested on an Ender3pro printer.
It happens that the clip requires adjustment - lightly heat the ring of the attached clip with a lighter, press it and wait for the plastic to cool
The clips and wheel are part of the manual leveling system featured in the movies:
You can find how to test these simple devices in the video -
You can find the exact assembly instructions for the device in the video - https://youtu.be/F6nuOSE3L2A
Additional information is available on the website - https://sites.google.com/view/projektylw/poziomowanie-sto%C5%82u-oscylatorem?authuser=0