1 / 10
Mosquito / Mosquito magnum silicone sock mould
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I stuck the three pieces together with duct tape. Make sure the mold is thight. Then i used a heat resistant…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 802
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (26)Powiązane
I stuck the three pieces together with duct tape. Make sure the mold is thight. Then i used a heat resistant silicone https://www.amazon.de/gp/product/B01MZ7EO1V/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1
i added a fan shroud
The fan shroud is the normal mk3 fan shroud, but 3mm to the left wider.
Category: 3D Printer Parts