FLSUN CUBE X-Carriage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chimera X-Carriage build for FLSUN Cube. I used the modular x-carriage base from MoonDoctor to design a new hot-end…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Chimera X-Carriage build for FLSUN Cube.
I used the modular x-carriage base from MoonDoctor to design a new hot-end and z-sensor holder.
Also designed a new Part-cooling fan duct for a 5015 Blower.
The only thing that remained stock is the x-carriage base.
The sensor is placed on the left side of the print head and needs to be attached loosely before installing the chimera so keep that in mind.
I've also added the fusion360 file with this mod so you can make changes yourself.
I would love to see your creations of this print so please post a "made" if you print this.
I also Have a custom firmware build of Marlin 1.1.9 for the FLSUN CUBE Chimera for this carriage mod.
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
2.8mm
Infill:
20%
Filament:
Creozone PLA/PETG
Notes:
Support only on build plate or use soluble support.
Fan duct has build in supports.
Also orientate the parts before printing.
Category: 3D Printer Parts