Spool Holder For Anycubic Mega S,X, and Chiron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are quite a few spool holders for the Anycubic Mega S. I wanted something that could simply fit over the…
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 228
- Wydruki
- 0
- Wyświetlenia
- 1391
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are quite a few spool holders for the Anycubic Mega S. I wanted something that could simply fit over the existing spool holder without any assembly/disassembly. It is a nice tight fit and works perfectly.
Using .2 layer height @ 60mm/s, it took about 5 hours to print but snapped on first try with a little pressure.
I printed it with the text facing up and used supports for the "upper" lip. The supports came off easy with 1mm XY gap and a 0.2mm Z gap.
I have included 3 different inner diameter sizes. If you need a specific size for your spools let me know and I'll resize it for you
- I added oversize spool holders for 73mm, 53mm, and 50mm.
** I'm pretty sure these work with the Chiron and Mega X as well. Please let me know if they don't.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Supports:
Yes
Resolution:
.2 Layer Height
Infill:
10%
Filament:
SunLu PLA
Grey
Notes:
- If I end up getting different size spools I will make them as well.
Category: 3D Printer Accessories