Corner Clamping Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple jig for clamping corners of things like boxes that need to be square. There are 3 sizes: 100 mm 150 mm 200 mm…
- Ocena
- 5 / 5
- Polubienia
- 193
- Pobrania
- 679
- Wydruki
- 10
- Wyświetlenia
- 2575
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Simple jig for clamping corners of things like boxes that need to be square. There are 3 sizes:
- 100 mm
- 150 mm
- 200 mm
The 150 and 200 mm versions are different to the 100 mm version as they have different shape spaces and some additional holes for creative clamping.
Pictures show a bunch of the 100mm clamps.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
60%
Filament: CCTREE PLA / PLA+ Any
Notes:
Higher infill values makes them stronger. I found at around 60% they are quite strong enough for my use. If you need more strength then I suggest a higher infill value.
Category: DIY