1 / 1
MK3S FS-Cover for 4 and 6mm tube (filament sensor cover) — zdjęcie 1

MK3S FS-Cover for 4 and 6mm tube (filament sensor cover)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament senbsor cover for people who want to feed their filament via a 4 or 6mm PTFE tube without a pneumatic fitting.

Ocena
4,5 / 5
Polubienia
12
Pobrania
123
Wydruki
2
Wyświetlenia
470
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

MK3S FS-Cover for 4 and 6mm tube

Just a quick modified filament sensor cover, which accepts a piece of 4 or 6mm PTFE tube directly. No need to buy a special pneumatic fitting.

Is this thing useful to you?

Don't hesitate to hit the ❤ and show some love. I'm always happy to hear from you in the 🗩 comment section. If you have problems printing my files: tell me in the comment section too!

Provided files

I do like to have real CAD-files, when downloading things from others. Most users don't provide files other than .STL-files. These are useless for further manipulation or quick changes. So I'll provide the following files to you:

FormatIncluded?Description
STL✓-
STEP✓Version 214
FreeCAD✓Version 0.19 Link Branch

Updates

  • 2022-05-24 Version for 4mm tubes has bigger bottom hole now. Do not use the first version please, it might jam your filament when unloading it!
     
  • 2022-05-23 first upload. Files: V0

Is this thing finished?

YES

Print Settings

Rafts: Not necessary

Supports: Not necessary

Resolution: 0.2

Infill: 100%

Filament: PETG, ABS, ASA, …

Notes:

Post-Printing

Holes are exactly 4/6mm. As they tend to be a bit smaller after printing, most tubes should be quite press-fit.

Assembly

None required.

Tagi