RJ45 Keystone Joint Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple RJ45 Keystone Enclosure for joints
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 714
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There has been few times IP camera plugs (IP Input) has burnt or got damaged, I used to cut the plug off a old IP camera and then solder the plug on the the camera that used to have a damaged plug, this is very time consuming and I needed a spare old camera to use its plug thought there has to be a better way.
started looking at keystone boxes, but nothing small enough to not take up too much space or to fit in camera enclosures.
enter the:
Rj45 Keystone Joint kit
Designed this from scratch, it started as a round tube, but was waaay too big, shaved some material here and there, got all the parts to fit together finally and here it is, have a look, give it a go, please let me know how you find it works, this is the 1st version and i might still change a few things on it, but have at it if you can improve on it :)