V Slot Drilling and Taping Jigs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of tools that will allow you drill for blind fastening and tap the ends of V Slot aluminum (Aluminium)…
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 851
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a set of tools that will allow you drill for blind fastening and tap the ends of V Slot aluminum (Aluminium) such as that from openbuilds.com.
I needed these while building my FK-1 large format 3D Printer. (https://www.youtube.com/playlist?list=PLoJycTgmGC47H5_A7Fs0giDvwOR5HQZRE)
The bushings I used for these are from Amazon and are available here: https://www.amazon.com/gp/product/B01G8XA51G/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=funking3d09-20&linkId=d94572c17b24b33c8dbe83ded11efe9e&language=en_US (affiliate link)
*Note: These should be about $4.50 USD. If they are higher, you might have to wait and let them come back down. I have seen them jump up to $14 USD.
A quick how-to and example video is available here: https://youtu.be/-Mqe7MNBpcA
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40%
Filament: IC3D PETG Black
Notes:
You might get by printing these in PLA. They are not under stress during use.
Category: 3D Printing