1 / 2
Fence for Bosch Benchtop Router Table RA1181
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My OEM fences would swell up from the year-round humidity, so instead of buying replacements, I designed these.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 7)Remiksy (0)Kolekcje (13)Powiązane
My OEM fences would swell up from the year-round humidity, so instead of buying replacements, I designed these.
Print Settings
Printer Brand:
Ultimaker
Printer:
S5
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
Any
Filament: Any Any Any
Notes:
For ours, we did 20% infill with a 2x line multiplier in Cura. We did ours in PETG, but any filament will do. If you find errors, let me know (I'm still new to 3D design)
Category: Replacement Parts