Compliant Phone mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compliant cell phone holder. I wanted a phone holder in my car that was easy to use. I can use one hand to put my…
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 161
- Wydruki
- 2
- Wyświetlenia
- 2517
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Compliant cell phone holder.
I wanted a phone holder in my car that was easy to use. I can use one hand to put my phone in the holder and remove it.
I used PolyCarbonate to print this so that it would take the heat in the car. should be able to use PETG as well
I used alien tape to attach the base to the dash.
I used a piece of filament for the three hinges. you may have to drill out the holes to clean the inside. then I used a soldering iron to melt them in place on the ends
Category: Mobile Phone
New ball mount and stronger spring use 20 x 3mm screws and nuts to mount the ball to the stand and the clamp together.
the spring, you will need to add supports and 100% infill
for the ball, also print at 100% infill as well
all the parts are correctly orientated for printing