1 / 5
36W UV Curing Station - Opening Closure — zdjęcie 1
1 / 5

36W UV Curing Station - Opening Closure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a plate to close the opening on the common 36W UV nail curing lamps which are often used to cure resin prints…

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
169
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

This is a plate to close the opening on the common 36W UV nail curing lamps which are often used to cure resin prints as they are cheap (on eBay or Amazon) and will operate continually rather than just on a short timer.

The plate has a "hook" at the top which is pushed into the top of the opening, then it has two lugs which guide it into a roughly central position and hold it in place during use.

It prints in two pieces - the main plate and a handle that makes it a lot easier to use. You can secure the handle using two small woodscrews.

I've lined the inside with foil tape.

I may eventually print one of the larger enclosure that can be used with this lamp, but I reckon this is a good start for curing miniatures conveniently and safely.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

20%

Notes:

Designed to print supportless.

How I Designed This

This was designed in OnShape - it is public on there if you want to remix from my original CAD.

Category: 3D Printer Accessories

Tagi