36W UV Curing Station - Opening Closure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a plate to close the opening on the common 36W UV nail curing lamps which are often used to cure resin prints…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a plate to close the opening on the common 36W UV nail curing lamps which are often used to cure resin prints as they are cheap (on eBay or Amazon) and will operate continually rather than just on a short timer.
The plate has a "hook" at the top which is pushed into the top of the opening, then it has two lugs which guide it into a roughly central position and hold it in place during use.
It prints in two pieces - the main plate and a handle that makes it a lot easier to use. You can secure the handle using two small woodscrews.
I've lined the inside with foil tape.
I may eventually print one of the larger enclosure that can be used with this lamp, but I reckon this is a good start for curing miniatures conveniently and safely.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
Designed to print supportless.
How I Designed This
This was designed in OnShape - it is public on there if you want to remix from my original CAD.
Category: 3D Printer Accessories