1 / 1
Mounting block for a lid to make an enclosure with the IKEA Metod Cabinet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this model you can easily create a removable lid for the IKEA Metod Cabinet and use it as a Printer Enclosure.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model can be printed with really low detailed settings and as fast as you can. Supports may only be needed at the transition.
Place them with double-sided tape and fix them with two two centimetre long screw's per block.
When they are mounted in the same direction on the front and back you could open the lid.
A self-made Printer Enclosure is a never ending project. All models I am going to use are listed in my Printer Enclosure Collection.