Moai Soap Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Again, inevitable.
- Ocena
- 5 / 5
- Polubienia
- 198
- Pobrania
- 483
- Wydruki
- 5
- Wyświetlenia
- 2639
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Again, I have debased Julien_DaCosta's excellent model on Thingiverse (https://www.thingiverse.com/thing:2493386) in hopes of winning a few measly Prusameters. So here you go: he's got a tray in his lower jaw and an “esophagus” to drain the soap scum down his throat and out the back.
I have to confess, I only printed this at half-scale because this is a BIG print – at least 9 or 10 hours at full scale for a full-sized bar of soap (nominally 51mm wide by 28mm thick). Plus, I'm guessing my wife wouldn't be too thrilled with a half-pound hunk of PLA sitting on the bathroom counter.