Nail Brush - Fully 3D printed!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I decided to make make a flully 3d printable brush design that can be adapted by future designs. In this first batch…
- Ocena
- 4,222 / 5
- Polubienia
- 294
- Pobrania
- 694
- Wydruki
- 9
- Wyświetlenia
- 3782
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
I decided to make make a flully 3d printable brush design that can be adapted by future designs.
In this first batch of brushes I will release a Bouldering/Climbing Brush, a Nail Brush, and a small Test Brush.
The brushes print in about 4 hours, (test brush around 30 min).
Use a 0.4 mm nozzle(and 0.4 mm line width), and 0.2mm layer height.
Please watch the video for more information!
Feel free to leave any questions or comments!
Link to bouldering brush Check out the Bouldering brush v2!
Check out my social media for sneak peaks and memes: YouTube Facebook Instagram
Update 23.01.2019
- Woo Hoo! BOW! Thankyou!
- ConfusedPrinter Found that when printing with PETG, one has to use the cooling fan to get reliable bridging. - More testing needs to be done to find the perfect fan speed, however at 100% fan speed the print definitive succeeds!
Category: Bathroom