(IKEA Vidja tri zone) 180 degree triple LED stripe pole clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamps 3x 10mm wide LED stripes to a 20mm pole without glue
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 652
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
At first I wrapped around the led stripe in a spiral, at the Vidja pole. But that does not work well with all the WLED effects.
So I designed a clip that holds three WS2812 (10mm) led stripes, vertical, at 0/90/180 degree. And now I can separate the stripes into zones (WLED segments), reverse directions and so on. The Vidja lamp shade gives a nice transition between the stripes/colors
The clip should work on any 20mm diameter pole.
10mm stripes clips in, with a bit of work and figer nails and should hold without glue or double sided tape.
Printed without supports in PETG on a 0.4 nozzle (0.6 nozzle is too coarse, I tried it :)