Blinds Frame for Window with air vents
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a few windows with air-vents / strips at the top of the window preventing us from hanging blinds inside the…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 496
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I had a few windows with air-vents / strips at the top of the window preventing us from hanging blinds inside the window frame as we did on all the other windows. I did not want to hang them before the window frame.
So i made this frame that will create some "screw meat" to screw the blinds on inside the window frame.
You can see on the X-Ray picture where the screw meat is. You can just use regular wood screws, but I do advice to pre-drill small holes to guide the screws better and prevent cracking the 3D part.
I created this using PLA, no support.
Mirror the design in your slicer to create the Left or Right side. ;)
Print instructions
Category: Decor