Parameterizable toilet brush (Escobillero)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My glass toilet brush was broken, so I decided to make one printed in 3D, and the result was so nice.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
My glass toilet brush was broken, so I decided to make one printed in 3D, and the result was so nice.
The design allows you to parameterize the measurements so that it can fit your needs.
Print instructions
I recomend to print it with PETG, but you can also print it with PLA or other materials.
Print it in the position it's generated and you will not need supports (at least I didn't need them with my MK3). Use infill 100%. Some brim is recomended.
The settings you can find in the .3mf file are those working well for me, but feel free to use those working well for you (this is just an example).
And remember this thing can (and must) be easily customized to suit your needs using the "customizer" that OpenSCAD has built in, just open the OpenSCAD file and write the measurements you need, render it (F6) and export it as a .stl file.