Parameterizable toilet brush (Escobillero)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.98 – €8.53 net (excluding VAT)
For file: toilet_brush_02mm_petg_mk3_6h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.75 excluding VAT (range midpoint).
- Weight reported by the author
- 125 g
- Print time reported by the author
- 6.81 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
My glass toilet brush was broken, so I decided to make one printed in 3D, and the result was so nice.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
My glass toilet brush was broken, so I decided to make one printed in 3D, and the result was so nice.
The design allows you to parameterize the measurements so that it can fit your needs.
Print instructions
I recomend to print it with PETG, but you can also print it with PLA or other materials.
Print it in the position it's generated and you will not need supports (at least I didn't need them with my MK3). Use infill 100%. Some brim is recomended.
The settings you can find in the .3mf file are those working well for me, but feel free to use those working well for you (this is just an example).
And remember this thing can (and must) be easily customized to suit your needs using the "customizer" that OpenSCAD has built in, just open the OpenSCAD file and write the measurements you need, render it (F6) and export it as a .stl file.