Raspberry Pi 4B Clip-on Fan Mount 30x30
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Background: So i built a voron, it uses a raspberry pi 4 as computational power for Klipper. RPI4B gets hot when not…
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 360
- Wydruki
- 3
- Wyświetlenia
- 1580
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Background:
So i built a voron, it uses a raspberry pi 4 as computational power for Klipper.
RPI4B gets hot when not cooled actively, thus, i came up with a clip-on design that printed in one piece and let me just smack on a pifan & heatsinks to cool it.
Info:
V1.1 may be thick enough to put heat-inserts in the holes, i personally just used long enough screws so i could tighten them with a nut beneath.
Print Settings
Printer:
Voron V2.4 300
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40
Filament:
eSun PLA+
Brown
Notes:
Print it however you like, but it was designed to print standing so it has layerlines going across the print for better flexibility.
I designed a break-away support piece you need to remove if you want the clips to clear the hdmi/usb ports.
Category: Electronics