TwoTrees Sapphire Pro Drag Chain Mounts Take Two
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chain system for the TwoTrees Saphire Pro Sp-3
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 660
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a small change to the original posted by G4Cab. I removed the Chain STL's, they are just not worth it. I lengthened the Cable Management for the 10x20 Chain setup and combined the cable management for the 7X7. You can purchase a 7x7 and 10x20 chain on Amazon for less that 25 bucks. I used these
7x7 Chain https://www.amazon.com/dp/B01M1EC6MO?psc=1&ref=ppx_yo2_dt_b_product_details
10x10 Chain ( Doesn't lay completely flat, needs coaxing) https://www.amazon.com/dp/B07WK15X25?ref=ppx_yo2_dt_b_product_details&th=1
I would run the printhead and both of the profiles at 50% infill and 20% on everything else.
I have also positioned the prints how I printed them. I would suggest full supports on everything but the 7x7 Hotbed which I have labeled no supports.
I also highly suggest printing the 10x20 Printhead in PETG. There are 2 different variants, one with BL and one without.
Print Settings
Printer:
Twotrees Sapphire Pro
Rafts:
No
Supports:
Yes
Resolution:
.20
Infill:
20-50%
Filament:
Any PLA and PETG
Any
Category: 3D Printer Parts