TwoTrees Sapphire Pro Drag Chain Mounts Take Two
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chain system for the TwoTrees Saphire Pro Sp-3
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 32
- Makes
- 0
- Views
- 661
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a small change to the original posted by G4Cab. I removed the Chain STL's, they are just not worth it. I lengthened the Cable Management for the 10x20 Chain setup and combined the cable management for the 7X7. You can purchase a 7x7 and 10x20 chain on Amazon for less that 25 bucks. I used these
7x7 Chain https://www.amazon.com/dp/B01M1EC6MO?psc=1&ref=ppx_yo2_dt_b_product_details
10x10 Chain ( Doesn't lay completely flat, needs coaxing) https://www.amazon.com/dp/B07WK15X25?ref=ppx_yo2_dt_b_product_details&th=1
I would run the printhead and both of the profiles at 50% infill and 20% on everything else.
I have also positioned the prints how I printed them. I would suggest full supports on everything but the 7x7 Hotbed which I have labeled no supports.
I also highly suggest printing the 10x20 Printhead in PETG. There are 2 different variants, one with BL and one without.
Print Settings
Printer:
Twotrees Sapphire Pro
Rafts:
No
Supports:
Yes
Resolution:
.20
Infill:
20-50%
Filament:
Any PLA and PETG
Any
Category: 3D Printer Parts