Marble track - ML4 - base stabilizer clip-on
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 27th of March I've replaced the click connector with a nut which can be screwed on the base stabilizer to close…
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 561
- Wydruki
- 7
- Wyświetlenia
- 2180
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 27th of March
I've replaced the click connector with a nut which can be screwed on the base stabilizer to close the loop.
Another remix for the motorized lift v4 which fits to motor base > v105. It will only fit on the new base with the ridge at the bottom which gives this part a good grip on the base.
It's a clip on part which can be attached to the base of the motorized lift v4 allowing to create a more stable construction for higher lifts.
When inserting a pin in the hole you'll be able to disconnect the part more easy as the connection is a snug fit.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament:
REAL PLA
Notes:
no supports needed.
print the ring 3 times. click in the body part using pliers.
Category: Playsets