Gridfinity Base for Ikea Alex
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity Inlay for Ikea Alex drawers.
- Ocena
- 4,684 / 5
- Polubienia
- 1757
- Pobrania
- 15 412
- Wydruki
- 174
- Wyświetlenia
- 63 958
- Oceny
- 155
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
2 or 6 Part Gridfinity base inlay for Ikea Alex drawers with rims for better fit and less wiggle room.
Drawer Dimensions 297mm x 525mm should be a nice fit.
*Updated to be a bit shorter since for some people it was a bit too large
Large (Print Part L1 & L2 once)
Part L1: Grid 7x6, Size 297mm x 252mm
Part L2: Grid 7x6, Size 297mm x 270mm
*Updated to be a bit shorter since for some people it was a bit too large
Small (Print Part S1 & S2 twice, Part 3 & 4 once)
Part S1: Grid 4x5, Size 169.5mm x 210mm
Part S2: Grid 3x5, Size 127.5mm x 210mm
Part S3: Grid 4x2+, Size 169,5mm x 103mm
Part S4: Grid 3x2+, Size 127.5mm x 103mm
*There will be more Gridfinity inlays for the different Ikea Alex sizes as soon as I get my hands on them to measure and testfit.
**There will be better prictures in the future.
The first prints didnt look good cause the filament was bad.
Will reprint it when i have the time and then add better pictures but I think you get it anyway.
***Im normaly not using PrusSlicer but I did Slice the models for the g-code print time preview.
I couldnt select the correct printer here. I printed it with an Ender 5 Plus.