Raspberry PI 3B+ case with space for 40x10 5V fan Noctua NF-A4x10
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All Raspberry cases I have found were small, fancy, without possibility to mount a fan. So I have made one.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 1736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
All Raspberry cases I have found were small, fancy, without possibility to mount a fan. So I have made one.
It is not the smallest one or the fanciest case, but it is easy to print and there is possible to mount 40x10 fan (I am using Noctua NF-A4x10) so temperature can be significantly lowered (from 60+ C to cca 35C in my case - see sshot).
Intentional big hole for USB is created as USB power connector is locked with hot glue (easily removable using IPO) to prevent any misbehavior.
To finish it - only M3 screws are needed (printed threads are used instead of nuts). Rest is optional or Noctua fan accessories were used.
Enjoy!
Print instructions
Unassociated tags: 3b+
Category: Computer Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 15
Notes:
I am using approx 50% speed to define perfect first layer (in Prusa slicer 10 instead of default 20).