1 / 6
Monitor stand / desk shelf — zdjęcie 1
1 / 6

Monitor stand / desk shelf

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple and stylish monitor stand

Ocena
5 / 5
Polubienia
619
Pobrania
2312
Wydruki
18
Wyświetlenia
15 820
Oceny
12

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

Remix of this design ( https://www.thingiverse.com/thing:4276960 ). I recreated it to make it fit my needs and be printable in one solid piece on my Ender 3 V2. Both of the legs can be printed at the same time on my 230 x 230 mm bed.

It's designed to raise your monitor by 80mm and fits board that are 150mm wide and 15mm thicc. I personnaly used a 500mm long board but you can use whatever lenght you want.

Edit : Added a new model to fit 200mm wide board. Still fits on 230x230mm beds.

Edit n°2 : Added a shorter version of the 200mm model so the height is reduced by 15mm.

Edit n°3 : Added a 18mm thick version of the 200mm model to fit thicker boards.

Print settings

Material : PLA
Layer height : 0.28 mm
Wall : 2 (sturdy enough for me but you can increase if needed)
Infill : 20%
Support : NO supports 

Tagi