RatRig V-Minion X-idler 20T
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the V-Minion X-idler printed part which utilizes a 20T idler
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 458
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to change the idler for the X axis. Unfortunately, I only had one with 20 teeth, which had a larger diameter (18 mm OD). I have adapted the printed part accordingly. (I have also enlarged the cutout a little further to make it easier to install the belt)
Please test/use at your own risk, as the inner diameter is also slightly larger. It works fine for me so far. It can be printed with the recommended settings from RatRig.
v2 is not yet tested, but I have only adapted the opening a little better to the overall design