Cable clip for mounting with a staple gun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extremely simple clip designed to be fixed with a staple gun
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
An extremely simple clip designed to be fixed with a staple gun. I find it much faster and easier to work with than the standard cable clips with a nail. Picture shows a quick and dirty install I did with these.
Print Settings
Supports:
No
Resolution:
Any
Notes:
Model should already be oriented correctly, simply multiply as needed. Just over 0.4 grams of filament per clip without scaling.
Use a tough material that will not shatter when stapling it: I used ABS. HIPS and nylon should be best, ASA and similar materials should work too. PLA and PTEG probably will not, because they tend to shatter.
The clip inner diameter is 5 mm and just right for network cables. If you have a thicker or thinner cable, simply scale the X and Y as needed.