Smaller housing for the 3D Systems Sense 2 3D-scanner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple housing for the 3D Systems Sense 2 3D-scanner. The original housing is twice the size and can get in the way…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A simple housing for the 3D Systems Sense 2 3D-scanner.
The original housing is twice the size and can get in the way when scanning in tight spaces, e.g. a cycle frame.
This is a really simple mod, just remove the old housing and use two of the original screws to fix the new one.
The grid of holes is meant for cooling and better grip.
Print Settings
Printer:
Modified Craftbot
Rafts:
No
Supports:
Yes
Resolution:
~0.25
Infill:
minimal
Filament:
any any
any
Notes:
The holes do not need the supports, they are small enough, so try to set the slicer to omit them there.
Category: DIY