1 / 3
Smaller housing for the 3D Systems Sense 2 3D-scanner — image 1
1 / 3

Smaller housing for the 3D Systems Sense 2 3D-scanner

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple housing for the 3D Systems Sense 2 3D-scanner. The original housing is twice the size and can get in the way…

Rating
0 / 5
Likes
2
Downloads
13
Makes
0
Views
160
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

A simple housing for the 3D Systems Sense 2 3D-scanner.

The original housing is twice the size and can get in the way when scanning in tight spaces, e.g. a cycle frame.

This is a really simple mod, just remove the old housing and use two of the original screws to fix the new one.

The grid of holes is meant for cooling and better grip.

Print Settings

Printer:

Modified Craftbot

Rafts:

No

Supports:

Yes

Resolution:

~0.25

Infill:

minimal

Filament:

any any

any


Notes:

The holes do not need the supports, they are small enough, so try to set the slicer to omit them there.

Category: DIY

Tags