Cable clips (for bycicles, pipes, etc.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple set of cable clips (for bikes or pipes in general). First number in the model name is the pipe diameter in…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A simple set of cable clips (for bikes or pipes in general).
First number in the model name is the pipe diameter in millimeters, second (and possibly third, some holders are designed for two cables) is the cable diameter in millimeters.
Scale the height as needed: 10-15 mm seems enough in most cases, but if you need a stronger holder, use more.
I designed this for my homemade e-bike ...
Print Settings
Printer:
Craftbot original
Rafts:
Doesn't Matter
Supports:
No
Resolution:
Any
Infill:
None
Notes:
Any normal printing material should do, but increase hot-end temperature a bit to prevent the print from cracking when snapping it on.
Scale height according to personal taste.
Category: DIY