K40, K40D, K40E right angle hose mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When I received my K40E, they forgot to add the mount that attaches the air hose to the machine. They eventually did…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 373
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
When I received my K40E, they forgot to add the mount that attaches the air hose to the machine. They eventually did send it out but it wasn't a right angle mount so I made my own.
This hose adaptor is for a 3in hose (3.18898 / 81cm) internal diameter. its the one that came with my machine. It shouldn't be hard to modify this to suit any size hose. If there is enough demand I can look at adding other sizes.
Please note the printing and post printing instructions
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
0.2 or 0.3
Infill:
10
Filament:
Any brand PLA
Notes:
I printed mine with 3 top, 3 bottom and 3 shell for strength. You can print at 0.3 layer height to save on printing time.
Please note the way supports are added in the slicer.the mount only needs supports to help with bridging and only on the ends.
the hose adapter has a shelf that is 1 layer high, this is only there so supports can be printed on it instead of all the way from the bed, reducing printing time, material and the chance of failure
Post-Printing
Remove this shelf in red along with any supports printed on it. its just there to reduce printing time
Category: Other